Technically speaking.
Tuff-Seal Prime is serious, heavy-duty flooring that contains twice as much premium-quality material (4.0 lb per tile) as the typical lightweight, rigid-plastic tile. This injection-molded, solid vinyl tile will not chip, crack, shift, loosen, split, or deflect under heavy stationary or rolling loads including forklifts, automobiles, and other industrial equipment. The high-density surface reduces humidity and repels dirt and dust to keep your space cleaner. And, in the rare case a tile is damaged or stained, you replace only that tile, not the entire floor.
Tuff-Seal vs Epoxy coating: Epoxy requires complex/costly preparation, special skills, and a significant interruption in use. Has a comparably short product life, provides no appreciable insulation, noise/vibration dampening, or ergonomic improvement.
Tuff-Seal vs Rigid plastic tiles: Rigid plastic is generally lower in quality, low load tolerance, and no moisture protection. Its design traps dirt, creates more, not less noise, offers no appreciable insulation or vibration dampening, and little ergonomic improvement.
Tuff-Seal vs Conventional vinyl: Conventional vinyl requires complex/costly preparation, special installation skills, and causes a significant interruption in use. The finished floor cannot be moved or reused and some adhesives produce lingering, objectionable odors.
Specifications: Tuff-Seal Tile Prime
| Material | Made from selected post-industrial recycled PVC |
| Size | 17.68″ × 17.68″ (450 mm x 450 mm) |
| Area | 2.17 sqft per tile |
| Thickness | 1/4″ (6.5 mm) |
| Weight per tile | 4.0 lb (1.8 kg) |
| Weight per sqft | 1.84 lbs (0.83 kg) |
| Patterns | Smooth, Stud, Marquis |
| Colors | White, Canvas, Yellow, Butternut, Caramel, Chocolate, Brick Red, Terracotta, Meadow, Evergreen, Cerulean Blue, Light Gray, Dark Gray, Slate, Black |
Properties: Physical/Chemical Properties
| Tuff-Seal Tile meets or exceeds the requirements of ASTM F 1700 for Solid Vinyl Tile |
| ASTM D 412 Breaking Load – 1653 psi; Static Load Limit-500 psi |
Properties: Fire Resistance
| ASTM E 648/NFPA 253 Critical Radiant Flux | Class 1 |
| FMVSS 302 | Meets or exceeds |
| FAA Vertical Flammability | Meets or exceeds |
Properties: Slip Resistance
| Meets or exceeds 0.6 for flat surfaces |
Properties: Chemical Resistance
| Chemical | Effect |
|---|---|
| Hydrochloric Acid 5% | No effect |
| Acetic Acid 5% | No effect |
| Isopropyl Alcohol 70% | No effect |
| Mineral Oil | No effect |
| Sodium Hydroxide 5% | No effect |
| Ammonia 5% | No effect |
| Bleach | No effect |
| Phenol 5% | No effect |
| Gasoline | No effect |
| Kerosene | No effect |
| Olive Oil | No effect |
| Motor Oil | No effect |
| Grease | No effect |
| Transmission Fluid | No effect |
| Brake Fluid | No effect |
| Sulfuric Acid | Moderate surface attack, slight color change |
Call toll-free for pricing
877-779-2454
Monday-Friday, 9am-5pm Eastern Standard Time
Email info@advantaflooring.com
